Product Overview
Reader
App
Sensor
Product Use
More Information
Preparing the Sensor Applicator
To ensure glucose readings are accurate, make
certain the Sensor Pack and Sensor Applicator codes
match.
How to do it:
Open the Sensor Pack by peeling the lid off
completely.
Unscrew the cap from the Sensor Applicator
and set the cap aside.
Place the Sensor Pack on a flat hard surface and line
up the dark mark on the Sensor Applicator with the
dark mark on the Sensor Pack. Press firmly down on
the Sensor Applicator until it comes to a stop.
Lift the Sensor Applicator out of the Sensor Pack.
The Sensor Applicator is prepared and ready to
apply the Sensor.
0:00 / 0:24
Previous
|
Next
Caution
The Sensor Applicator now contains a needle. Do NOT touch
inside the Sensor Applicator or put it back into the Sensor Pack.
Summary of Contents for FreeStyle Libre
Page 64: ...Previous Next ...