Product Overview
Reader
App
Sensor
Product Use
More Information
Starting Your Sensor
Start the Sensor with the App if you would like to only use the
App to check your glucose. If you want to use both the Reader
and the App to check your glucose, you must start the Sensor
with the Reader first.
How to do it with the App:
Tap the scan button
.
Hold the top of your iPhone near the Sensor. Hold still
until you hear a tone and/or feel a vibration. This
completes the scan.
The Sensor can be used to check your glucose after the start-
up period. While the Sensor is starting up, you can navigate
away from the App.
Previous
|
Next
Note
If your Sensor is not successfully scanned, you may receive
a Scan Error. Tap the scan button and scan again.
Remember that FreeStyle LibreLink and Readers do not
share data. For complete information on a device, be sure
to scan your Sensor every 8 hours with that device;
otherwise, your reports will not include all your data.
Summary of Contents for FreeStyle Libre
Page 64: ...Previous Next ...
