background image

Using Your Charger

The instructions in this section explain how to use your charging system to charge your

generator battery and charger battery, how to use the charging apparel, and how to care

for and travel with your charging system.

NOTE: Each time before using the system, inspect the device and its accessories for

damage. Avoid using a damaged device or accessory. If your device is damaged,

contact Technical Support.

Pairing the Charger with the Patient Controller

Before you use your charger for the first time, you may want to pair the charger with

your patient controller. Pairing refers to setting up communication between the charger

and the patient controller. When these devices are paired, you can use your patient

controller to monitor charging sessions, adjust charger settings, such as volume control,

and perform charger software updates. Refer to your patient controller user guide for

more information.

NOTE: Your charger and patient controller do not need to be paired or connected to

Bluetooth® wireless technology in order to charge your generator.

To prepare the charger for pairing, do the following:

1. Ensure that your patient controller and charger are charged.

1.
2. Place the patient controller near the charger.

2.
3. Turn on the charger.

3.
4. Press and hold the power icon on the charger for 5 seconds, and then release the

4.

button. The power icon and the battery icon blink once. Then the power icon blinks

quickly, indicating the charger is in the pairing state.

5. On the patient controller, select the charger you are pairing. Refer to your patient

5.

controller manual for more information.

NOTE: If the pairing does not occur within 5 minutes, the charger exits pairing

mode and then automatically turns off after 90 seconds of inactivity.

When to Charge Your Generator

Your clinician will help you plan a charging schedule that will work best for you to

maintain effective therapy. For example, you may establish a charging routine of once per

week.
The following are additional considerations to help you decide when to charge your

generator:

Prior to an MRI


Prior to an upcoming surgery


In anticipation of travel


When the next charging opportunity is uncertain


When the patient controller application displays a low battery notification for your

generator

6

Summary of Contents for Eterna 16000





































Reviews: