Manual ZX0 HB 600 en - Revision 05 |
69
1
Temperature-compensated pressure gauge with coupling (ABB part number GCE0905091P0101)
(figure 2.3.1.1.3)
1
Set of open-ended spanners, 8 to 19 mm AF
1
Set of ring spanners, 8 to 19 mm AF
1
Ratchet, 3/8”, with extensions and 8 to 19 mm AF socket keys and 4 to 10 mm Allen key inserts
1
Ratchet, ½”, with extensions and 10 to 19 mm AF socket keys and 4 to 10 mm Allen key inserts
1
Set of screwdrivers for slotted and cross-head screws, sizes 1 to 3
1
Set of electrician’s pliers (end cutting nipper, pointed pliers, flat end pliers, stripping tongs)
1
Rubber mallet
1
Set of fitter’s hammers
1 Leveller
1
Plumb bob
1
Guide string
1
Scribing iron
1 Punch
1 Tri-square
1
Tape measure
1
Calliper gauge
1
Continuity tester
1
Multimeter (voltage, current and resistance)
1
Torque wrench, 0 – 40 Nm, calibrated
1
Torque wrench, 15 – 100 Nm, calibrated
1
Extension cable, 230 V, 15 m long 1 Cable drum, 230 V / 16 A, 50 m
1
Angle grinder, small
1
Hand-held drill, chuck up to 13 mm
1
Hammer drill
1
Welding m accessories
1
Set of steel drill bits, 1 to 13 mm
1
Set of concrete drill bits, 6 to 12 mm
1
Steps, 8 rung
2
Trolley jacks (recommended capacity 2 t) or
2
Hydraulic lift trolleys (recommended capacity 3.5 t per pair)
4
Lifting ropes, 0.75 m, recommended capacity 1 t
4
Lifting ropes, 1.5 m, recommended capacity 1 t
4
Shackles, capacity 1 t
2
Pinch bars
5
Handling tubes
2
Chain hoists, 0.25 t including chain
1
Site lighting
1 Torch
1
Hand-held lamp
1
Vacuum cleaner
Several wooden planks
Several wooden beams
Soft, non-fraying cleaning cloth
Household cleaner, chlorine-*free
The tools required for assembly of the switchgear system are
detailed in the list below. Tools are not part of the ABB scope of
supply.
All the tools listed must comply with the safety regulations of the
country concerned.
8 List of tools
