Recommendations
•
Only install switchgear and/or switchboards
in closed rooms suitable for electrical
equipment
•
Ensure that installation, operation and
maintenance are carried out by specialist
electricians only
•
Fully comply with the legally recognized
standards (IEC or local), the connection
conditions of the local electrical utility and
the applicable safety at work regulations
•
Observe the relevant information in the
instruction manual for all actions involving
switchgear and switchboards
•
Pay special attention to the hazard notes in
the instruction manual
•
Make sure that the specified data are not
exceeded under switchgear or switchboard
operating conditions
•
The user’s personnel must act responsibly in
all matters effecting safety at work and correct
handling of the switchgear
Read and keep these instructions
Carefully read and understand this instruction
sheet before installing, operating and maintaining
your UniGear ZVC. For safe operation the
appropriate Chinese or International Standards
should be applied.
Keep the instruction manual accessible to all
personnel involved in installation, operation
and maintenance. This instruction sheet should
be available for reference wherever UniGear
ZVCs are used. Keep this instruction sheet in a
location where you can easily retrieve and refer
to it.
Warning!
•
Always follow the instruction manual
and respect the rules of good engineering
practice
•
Hazardous voltage can cause electrical
shocks and burns
•
Disconnect power and then earth before
proceeding with any work on this
equipment
Notice
The instructions covered in this publication are
intended only for qualified personnel and are
not a substitute for adequate training and
experience in safety procedures.
If you have any further questions about this
instruction manual, the members of our field
organization will be pleased to provide the
required information.
—
1 Safety precautions
4
U N I G E A R Z V C
M E D I U M V O L T A G E P R O D U C T S