ABB TZIDC-200, Operating Instruction

Page: 45 / 68

TZIDC-200, TZIDC-210, TZIDC-220 DIGITAL POSITIONER | 42/18-85-EN REV. E 45
Parameter descriptions
Parameter Display Function Possible parameter setting Unit Factory setting
P1._ STANDARD
P1.0 ACTUATOR
Actuator type Actuator type LINEAR, ROTARY --- LINEAR
P1.1 AUTO_ADJ
Automatic adjustment Autoadjust Function --- ---
P1.2 ADJ_MODE
Auto adjust mode Automatic adjustment mode FULL,STROKE,CTRL_PAR, ZERO_POS, LOCKED FULL
P1.3 TEST
Test Test Function --- INACTIVE
P1.4 FIND_DEV
Find device Find device DISABLE, ONE TIME, CONTINOUS --- DISABLE
P1.5 EXIT
Return Return to operating level Function --- NV_SAVE
P2._ SETPOINT
P2.0 MIN_RGE
Min setpoint range Min. setpoint range 4.0 to 18.4 mA 4.0
P2.1 MAX_RGE
Max setpoint range Max. setpoint range 20.0 to 5.6 mA 20.0
P2.2 CHARACT
Charact. curve Characteristic curve LINEAR, 1:25, 1:50, 25:1, 50:1, USERD --- LINEAR
P2.3 ACTION
Valve action Direction of action DIRECT, REVERSE --- DIRECT
P2.4 SHUT_CLS
Shut-off value 0% Shut-off value 0 % OFF, 0.1 to 45.0 % 1.0
P2.5 SHUT_OPN
Shut off value 100% Shut-off value 100% 55.0 to 100.0, OFF % OFF
P2.6 RAMP UP
Set point ramp, up Setpoint ramp (up) OFF, 0 to 200 --- OFF
P2.7 RAMP DN
Set point ramp, down Setpoint ramp (down) OFF, 0 to 200 --- OFF
P2.8 EXIT
Return Return to operating level Function --- NV_SAVE
P3._ ACTUATOR
P3.0 MIN_RGE
Min. of stroke range Operating range, min. 0.0 to 90.0 % 0.0
P3.1 MAX_RGE
Max. of stroke range Operating range, max. 100.0 to 10.0 % 100
P3.2 ZERO_POS
Zero position Zero position CLOCKWISE, CTCLOCKWISE --- CTCLOCKWISE
P3.3 EXIT
Return Return to operating level Function --- NV_SAVE
P4._ MESSAGES
P4.0 TIME_OUT
Control time out Dead band time limit OFF, to 200 --- OFF
P4.1 POS_SW1
Position switch 1 Switching point SW1 0.0 to 100.0 % 0.0
P4.2 POS_SW2
Position switch 2 Switching point SW2 0.0 to 100.0 % 100.0
P4.3 SW1_ACTV
Switchpoint 1 enable Active direction SW1 FALL_BEL, EXCEED --- FALL_BEL
P4.4 SW2_ACTV
Switchpoint 2 enable Active direction SW2 FALL_BEL, EXCEED --- EXCEED
P4.5 EXIT
Return Return to operating level Function --- NV_SAVE
P5._ ALARMS
P5.0 LEAKAGE
Leakage detection Leakage to actuator ACTIVE, INACTIVE --- INACTIVE
P5.1 SP_RGE
Setpoint rng monitor Outside the setpoint range ACTIVE, INACTIVE --- INACTIVE
P5.2 SENS_RGE
Sens. range monitor Operating range exceeded ACTIVE, INACTIVE --- INACTIVE
P5.3 CTRLER
Controller monitor Controller inactive ACTIVE, INACTIVE --- INACTIVE
P5.4 TIME_OUT
Control time out Dead band time limit ACTIVE, INACTIVE --- INACTIVE
P5.5 STRK_CTR
Stroke counter Movement counter ACTIVE, INACTIVE --- INACTIVE
P5.6 TRAVEL
Travel counter Travel counter ACTIVE, INACTIVE --- INACTIVE
P5.7 EXIT
Return Return to operating level Function --- NV_SAVE