![background image](http://html1.mh-extra.com/html/abb/tzidc-110/tzidc-110_operating-instructions-manual_3448132032.webp)
32
Electro-pneumatic positioner TZIDC-110
41/18-77 EN
4
Technical data
4.1 Basic model
Communication
Profiles
PROFIBUS PA Profile for Process Control Devices
Electro Pneumatic Actuator V3.0
Block types
1 AO Function Block, 1 Transducer Block,1 Function Block
Physical layer
Compliant to the standard IEC 61158-2
Transmission rate
31.25 Kbit/second
Power supply
Bus-powered: 9.0 V DC ... 32.0 V DC
Max. withstand voltage
35 V DC
Current consumption
10.5 mA
Fault current
15 mA (10.5 mA + 4.5 mA)
Name
Physical device tag
TZID-C110
PNO ID number
0x0639
Device ID
0X3200028xyz
Bus address
Between 0 and 126, standard bus address 126
Output function
Range
0...6 bar (0...90 psi)
Air capacity
at supply pressure of 1.4 bar (20 psi)
5.0 kg/h = 3.9 Nm
3
/h = 2.3 scfm
at supply pressure of 6 bar (90 psi)
13 kg/h = 10 Nm
3
/h = 6.0 scfm
(Booster, for increasing air capacity, on request)
Output function
for single or double acting actuators,
air is vented from actuator or actuator is blocked in case of an electrical power failure
Summary of Contents for TZIDC-110
