20
“Operation and installation manual”
EN
3.3.2 Overview of the EVSE, inside
20
30
31
02
12
13
35
36
37
32
39
38
40
33
34
41
42
43
Ref. Part
Function
30
Communication and control section
To allocate the communication and control board
31
Power modules
To provide the physical containment for various power
components
32
AC input fuse
Input protection of the EVSE
33
Main AC terminals
To connect the AC input cable
34
Ethernet connector
To connect the EVSE to Internet (e.g. in case of lack of cellular
signal)
35
Main DC breakers
To connect or disconnect the power modules
36
AC Auxiliary breaker
To connect or disconnect the AC auxiliary power supply
37
Tilt sensor device
Optional device to disconnect the AC input in case of
collision, and consequent tilt, against EVSE
38
PE busbar
To connect the Protective Earth (PE) cable
39
Tilt sensor terminal block
To connect the tilt sensor device
40
Main AC SPD
Surge protection device. To protect the AC input line from
overvoltage
41
Heater
To remove internal condensation
42
Main AC protection barriers
To protect the AC terminals from accidental contact
43
Cables entry plate
To route the cables inside the EVSE in the right position