12
“Operation and installation manual”
EN
Risk analysis and description
Suggested action
Inadequate cleaning that:
- does not allow adequate air intake for cooling
- does not allows the reading of safety labels.
Clean the equipment, labels and installation
environment.
Stored energy in components that could generate
hazardous discharges.
Wait at least 15 minutes after turning off the EVSE
and perform the total de-energization procedure
before working on the internal components of the
charger (refer to
“9.3. Total de-energization of the
).
The EVSE contains components and circuit boards
that are sensitive to electrostatic discharge.
Take ESD prevention measures to protect the
electronic components during installation and
maintenance of the EVSE.
Inadequate training of staff.
Ask for supplementary courses.
Incomplete installation, equipment or its
components temporarily mounted.
Prevent unauthorized access to the installation area.
Use a sufficient number employees and PPE.
No cable extensions, adapters, Y-cables or similar
may be used unless explicitly stated by the vehicle
manufacturer.
Manufacturer and national guidelines and
regulations about charging stations must be taken
into account.
The AC cable, owned by the user, could be damaged
(valid only if the AC socket is present on the EVSE).
Check the integrity of the cable and connectors
before connecting the cable to the EVSE.
Not allowed to place in ATEX environment.
Reassess the environment or the place of
installation.
2.3 General signs and signal words
In the manual and/or in some cases on the equipment, the danger or hazard zones/components are indicated
with signs, labels, symbols or icons.
Symbol
Description
General risk
With signal word ‘Danger’: If you do not obey the instruction, this can cause injury or death
With signal word ‘Warning’: If you do not obey the instruction, this can cause injury
With signal word ‘Caution’: If you do not obey the instruction, this can cause damage to the EVSE
or to property
Hazardous voltage that gives risk of electrocution
Risk of pinching or crushing of body parts
Rotating parts that can cause a risk of entrapment
Hot surface that gives risk of burn injuries
With signal word ‘Note’: A note gives more data, to make it easier to do the steps, for example
Information about the condition of the EVSE before you start the procedure
Requirements for personnel for a procedure