manualshive.com logo in svg

ABB S4, Electrical Troubleshooting Manual

Share
Download
ABB S4 Electrical Troubleshooting Manual Download Page 75

Page 3 - 7

Loading System Software

Electrical
Troubleshooting Guide
IRB6400 M94A

Software Loading Procedure (Cont)

e.

Select motion parameters.

The choices are:

STANDARD

SERVICE

Use standard if the system has only 6 axes and
no external axes. Use service if the system has
external axes.

The control will then finish booting from Disk 3.

6.

When the control prompts you to insert the IRB Disk
(also known as Elmo/Siemens disk), wait for the
disk drive active light to go out.
Then insert IRB Boot Disk (article number
3HAB2314-1.rev# or 3HAB2315-1/rev#).
Press 

OK

.

7.

When the control is finished with the IRB Disk it will
ask you:

“

Any optional disks to install?

”.

If you have any of the following:

Advanced Functions Disk (program number
3HAB2304-2/rev#),
RAP Serial Link (program # 3HAB2308-1/rev #),
Arcware M94A (program # 3HAB2309-1/rev #),
Spotware M94A (program # 3HAB23XX-X/rev #).

Insert the disk(s) one at a time and press 

YES.

Keep loading any other optional disks until you are
finished with your options.
When you have finished loading the optional disks
or if you have no optional disks press 

NO

.

The control will then restart and the software is
loaded.
You may get Joint Sync errors at this point. Press

OK 

and then continue.

8.

You must now load the system parameters from
Boot Disk 4 or load the system parameters from
your personal disk on which the current parameters
have been stored.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for S4































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands