Displays available instances of the circuit breaker function with parameter settings
SXCBR for various time limits and pulse lengths. For example, different circuit
breakers may require different pulse lengths to react. The setting
tOpenPulse
is
used to set the length of the pulse required to open a breaker.
Circuit switch SXSWI
Main menu/Settings/General settings/Control/ApparatusControl/
CircuitSwitch(XSWI)/XS
Displays available instances of the circuit switch function SXSWI with a number
of settable parameters per instance for time and pulse settings, output reset and
switch type.
Local/Remote switch LocalRemote, LocRemControl
Main menu/Settings/General settings/Control/ApparatusControl/
LocalRemote/LR
Displays available instances of the local/remote function LocalRemote,
LocRemControl that permit the user to set the control mode.
Reservation input RESIN
Main menu/Settings/General Settings/Control/Apparatus Control/
ReservationInput/RE
Displays available instances of the Reservation input function RESIN with one
settable parameter per function for future use.
Switch controller SCSWI
Main menu/Settings/General settings/Control/ApparatusControl/
SwitchController(CSWI)/CS
Displays instances of the switch controller function SCSWI with eight settable
parameters. These are settings for the control model, position dependency and
various threshold times.
9.2.5.2
Control commands
Automation bits, command function for DNP3.0 (AutomationBits)
Main menu/Settings/General settings/Control/Commands/Automation bits/
ABI
A parameter to enable or disable the function is available.
Single command SINGLECMD
Main menu/Settings/General settings/Control/Commands/SingleCommand/CD
Section 9
1MRK 511 188-UEN C
Read and change settings
48
Operator's manual
