3
mA input module (MIM)
4
Ordering and serial number
5
Manufacturer
6
Transformer designations
7
Transformer input module, rated currents and voltages
8
Optional, customer specific information
9
Order number, dc supply voltage and rated frequency
10
Product type, description and serial number
11
Product type
5.2
How to connect to the power supply
GUID-30AD9F73-5CA5-41A7-8283-C322AF1DA813 v2
The power supply module is on the leftmost side (rear view) of the IED. The
connector X11 is a 5-input phoenix type contact. See
IEC08000471-BG V1 EN-US
Figure 6:
Rear view of the 1/2 x 19" IED
1. Connect wires or cables to the IED terminals (see
connection diagram) in accordance with the established guidelines for this type
of equipment.
Insert only the corresponding male connector to the female
connector. Inserting anything else (such as a measurement probe)
may violate the female connector and prevent a proper electrical
contact between the printed circuit board and the external wiring
connected to the screw terminal block.
Section 5
1MRK 500 129-UEN A
Powering up the IED
20
670/650 series 2.2 IEC
Quick start guide