Committing values takes a few seconds.
If the values are not committed, they are not taken into use and they are lost
after a reboot.
4.2.9
Clearing and acknowledging
All messages and indications, including LEDs and latched outputs as well as registers and
recordings, can be reset, acknowledged or cleared using the Clear menu.
1.
Click
Clear
in the left navigation bar.
GUID-EAA33A44-5545-4ED5-A615-B6DB76D3198C-ANSI V2 EN
Figure 42:
Selecting clear menu
2.
In the
New Value
list, select
Clear
to choose the item to be cleared.
3.
Click
Write to IED
.
GUID-C53AC9EF-E0A1-4F27-979C-7D0B78A95EC3-ANSI V2 EN
Figure 43:
Clearing indications and LEDs
1MAC456939-IB D
Section 4
Using the HMI
620 series ANSI
65
Operation Manual