4.
To browse different function blocks, scroll the list with
and
and to select a
function block press
. To move back to the list, press
.
The function block list is shown in the content area of the display. On the left in the
header, you see the current setting group, and on the right the menu path.
5.
To browse the parameters, scroll the list with
and
and to select a parameter,
press
.
The setting group values are indicated with #.
A070899-ANSI V2 EN
Figure 73:
Setting group parameter
6.
To select a setting group value, press
and to edit the value press
.
A071168-ANSI V2 EN
Figure 74:
Selecting the setting group value
Only values within the selected setting group can be changed.
7.
Press
or
to change the value and
to confirm the selection.
1MAC456939-IB D
Section 6
Operating procedures
620 series ANSI
97
Operation Manual