ABB REJ603 Product Manual Download Page 23

Page: 23 / 24

Self-powered feeder protection

1MDB07217-YN

REJ603

Product version: 3.0

Issued: 2017-11-21

Revision: E

ABB

18.

References

The www.abb.com/substationautomation portal
offers you information about the distribution
automation product and service range.

You will find the latest relevant information on
the REJ603 protection relay on the product
page.

The download area on the right hand side of the
Web page contains the latest product

documentation, such as application manual,
technical presentation and so on. The selection
tool on the Web page helps you find the
documents by the document category and
language.

The Features and Application tabs contain
product related information in a compact format.

19.

Document revision history

Document revision / Date

Product version

History

A/2015-06-06

3.0

Self-powered feeder protection REJ603 V3.0 release
with support of conventional CT support

B/2015-09-04

3.0

Content updated

C/2016-03-08

3.0

Content updated

D/2017-03-28

3.0

Content updated

E/2017-11-21

3.0

Content updated

Summary of Contents for REJ603

























Search results

Summary of Contents for REJ603

Reviews:

Related manuals for REJ603

Brands by name

Popular brands

ABB REJ603, Product Manual

Search results

Summary of Contents for REJ603

Reviews:

Related manuals for REJ603

Brands by name

Popular brands