- 55 -
000895AG
4 - Lifting and transport
U
npacking and checking
Bear in mind that the packaging elements (cardboard, cellophane,
staples, adhesive tape, straps, etc.) may cause cuts and/or injuries if not
handled with care. They should be removed by suitable means and not
left in the hands of individuals who are not responsible (e.g. children).
The packaging components must be disposed of in accordance with the regulations in force in
the country of installation.
When you open the package, check that the equipment is undamaged
and make sure all the components are present.
If any defect or damage is detected, please stop, contact the carrier and
also promptly inform the ABB Service .
G
eneral Handling Information
When the REACT2-BATT is out of the package, pay attention to:
- Do not short circuit the positive (+) and negative (-).
- Avoid contacting between the metals and the battery unit.
- Do not use seriously scarred or deformed battery unit.
- Do not damage sheath of connectors.
L
ist of components supplied
Inside the package the following components required to correctly install
the inverter are supplied
Components supplied together with the inverter
REACT2-UNO
:
Components available for REACT2-UNO
Quantity
Bracket for REACT2-UNO wall mounting
1
Connector for connection of the multifunctional relay
2
Connector for connecting the communication and control signals
1
0KH[QXWV0ÀDWZDVKHUDQG0VHUUDWHGORFNZDVKHUVIRU
protective earth cable installation
1 + 1 + 1
-XPSHUVIRUFRQ¿JXUDWLRQRIWKH
parallel input channels
1 (red)
+
1 (black)
