manualshive.com logo in svg

ABB REACT 2 Series, Product Manual

Share
Download
ABB REACT 2 Series Product Manual Download Page 105

- 105 -

000904AG

7 - Operation

‡

 Pre-commissionig phase 2 - Internal web UI access 

- DEVICE USED TABLET/SMARTPHONE.  
 SCAN this QR code (it is also reported in the “Inverter Pre-Commis-

VLRQLQJ´À\HULQVLGHWKHER[RIWKH5($&7812$QLQWHUQHWEURZVHU

page showing the step by step procedure will be open. 
 
 

The information contained in this QR code is the IP address of the web user interface of the 
inverter: http://192.168.117.1
Recommended browsers: Chrome from v.55, Firefox from v.50, Safari from V.10.2.1

 
 
- DEVICE USED LAPTOP. 
Open an internet browser page and insert http://192.168.117.1 on the 
address bar.

.

STEP 1 - Administrator/User login credentials

-  Set the Administrator account user and password (mini-

mum 8 character for password): 
Administrator account can open and view the contents of 
photovoltaic site. Additionally, they can make changes to 
inverter settings. User and password are CASE SENSITI-
VE.

-  Set the User account user and (optional) password (mini-

mum 8 character for password): 
User account can only read data. It cannot make any 
changes. User and password are CASE SENSITIVE.

-  Click on “Next” button to proceed to the next stage of the 

FRQ¿JXUDWLRQZL]DUG

Summary of Contents for REACT 2 Series
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands