- 108 -
000841DG
7 - Operation
STEP 4 - Inverter country standard and Input configuration
-
Country standard: selection of grid standard
:
Set the grid standard of the country in which the inverter
is installed.
After the grid standard is set you have 24 hours to make any changes to the grid standard
value; 24 hours later the Country Standard sub-menu will be locked, and the remaining time
shall be reset in order to have the 24 hours of unlocked operation available again to select
a new grid standard (follow the procedure “Resetting the remaining time for grid standard
variation” described in the relevant section).
-
Input mode
:
Only Independent configuration are available.
Confirm the settings by clicking “END” and the inverter will
reboot.
A notification will confirm that the wizard is completed.
