40
FEM610 |
PROCESSMASTER | OI/FEM610-EN REV. A
When an alphanumeric entry is made, a value is set by
entering the individual decimal positions.
1
Select the parameters you want to set in the menu.
2
Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
3
Use
to select the decimal place to change.
4
Use
/
to set the desired value.
5
Use
to select the next decimal place.
6
If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7
Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
7 . . .Operation
. . .Selecting and changing parameters
Parameter name
12.3456 [unit]
Next
OK
Parameter name
ABC………
ABCDEFGHIJKLMOPQ
Next
OK
Menu name
Parameter name
Currently set value
Next
Edit
3
Use
to select the decimal place to change.
4
Use
/
to set the desired value.
5
Use
to select the next decimal place.
6
If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7
Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Exiting the setup
For some menu items, values must be entered. If you don't
want to change the parameter, you can exit the menu as
described below.
1
Pressing
(Next) repeatedly moves the cursor to the
right. Once the cursor reaches the end position, ‘Cancel’
is displayed in the lower right of the screen.
2
terminates editing and exits the menu item. Use
to return to the start.
Note
The LCD display automatically returns to the process display
three minutes after the last button has been actuated.
