66
FEP630, FEH630
ELECTROMAGNETIC FLOWMETER | OI/FEP630/FEH630-EN REV. D
… 8 Operation
Selecting and changing parameter
Entry from table
When an entry is made from a table, a value is selected from a
list of parameter values.
Menu name
Parameter name
Currently set value
Next
Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the list of available parameter values. The
parameter value that is currently set is highlighted.
Parameter name
Parameter 1
Parameter 2
Parameter 3
Cancel
OK
3. Select the desired value using
/
.
4. Confirm the selection with
.
This concludes the procedure for selecting a parameter value.
Numerical entry
When a numerical entry is made, a value is set by entering the
individual decimal positions.
Menu name
Parameter name
12.3456 [unit]
Next
Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
12.3456 [unit]
Next
OK
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering
the individual decimal positions.
Menu name
Parameter name
Currently set value
Next
Edit
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
ABC………
ABCDEFGHIJKLMOPQ
Next
OK
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
