ABB Power2 850-M16, Operation Manual

Page: 54 / 178

Operation Manual / Power2 800-M / 4 Product description
5 Operation and service Page 22 / 59
© Copyright 2016 ABB. All rights reserved. HZTL4061_EN Revision A September 2016
5.2 Service work
Service work includes visual controls, monitoring, measuring and inspection as well as func-
tion checks. Service work enables the detection and rectification of changes to the low and
high-pressure stage and ensures full operability of the low and high-pressure stage.
CAUTION
Service intervals
Service work on the low-pressure and high-pressure stage that is omitted or
performed too late can cause excessive contamination and wear as well as
operating failures.

Carry out the service work at the specified time intervals.
CAUTION
Shortened service intervals
Exceptional stresses such as several starts/stops per day, harsh environ-
mental conditions, poor fuel quality or high system vibrations can lead to
untimely machine damage even if the prescribed service intervals are ob-
served.

Agree on a shortened service interval with ABB Turbo Systems.
To prevent machine damage caused by ageing and downtime, we recommend having an in-
spection carried out by an ABB Turbocharging Service Station no later than 5 years after the
last service.
5.2.1 Service procedures every 25 … 50 hours

Visual check for air, exhaust gas, water and oil leaks.

Record operating data and enter in the engine logbook.

In case of deviations, determine the cause.
5.2.2 Service work at 100 hours after commissioning

Clean or replace the oil filter located in the supply pipe to the low-pressure and high-
pressure stage while the engine is stopped.
5.2.3 Service work according to instructions of enginebuilder

Clean or replace the oil filter located in the supply pipe to the low-pressure and high-
pressure stage while the engine is stopped.