Note/Illustration
Action
xx2100000852
Remove the attachment screws on the
door.
3
xx2100000852
Turn the locking ring anti-clockwise to
remove the connector.
4
Push the Ethernet outlet connector with
cable into the cabinet.
5
Disconnect all connectors from the unit
to be replaced.
6
Remove the cables out from the clips in
the cabinet carefully.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
7
Take the Ethernet outlet connector with
cable out from the upper side.
8
Continues on next page
Product manual - OmniCore V250XT Type B
315
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.3.5 Replacing the Ethernet outlet connector with cable
Continued
Summary of Contents for OmniCore V250XT Type B
