FIELDBUS COMMUNICATION
STATUS
Approved
SECURITY LEVEL
Public
DOCUMENT ID.
1SFC132374M0201
REV.
B
LANG.
en
PAGE
13/23
© Copyright 2019 ABB. All rights reserved.
3.
Use the following table to set the required parameters. Remember to adjust the parame-
ters to suite your specific network settings.
Parameter name
Default settings
DHCP / BOOTP
Manual
IP Address
192.168.171.254
Subnet Mask
255.255.255.0
Standard Gateway
192.168.171.1
Number of Modbus TCP masters under super-
vision
1
Allowed number of supervised connections
missing
0
Allowed Modbus TCP IP Address for master 1
... 4
0.0.0.0 ... 255.255.255.255 for master 1
0.0.0.0 ... 0.0.0.0 for master 2-4
Timeout for master 1 ... 4
10s
Device port 1 ... 4 used
PSE
Device address for device 1 ... 4
1,2,3,4
4.
Select the connected FBP device and chose PSE in the drop-down menu called Expected
device. For the ports without a connected device chose Port not used.