USB2-F-7x01 – Quick Start Guide
© Connective Peripherals Pte Ltd
Clearance Number : CP#033
Document Reference Number: CP_000043
USB2-F-7x01_Quick_Start_Guide Version 1.3
Congratulations on your purchase of the Connective Peripherals USB2-F-7001
or USB2-F-7101 USB to CANbus adapter. Getting started is quick and easy:
General Installation
Detailed device driver installation instructions, port information and
mechanical details are in the USB2-F-7x01 datasheet. This can be
downloaded from:
http://www.connectiveperipherals.com
To begin, connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB bus,
so no external power supply is required.
Device drivers are needed for the PC to communicate with the USB2-
F-7x01,
and
can
be
downloaded
from:
http://www.connectiveperipherals.com
. To install the drivers , follow
the following steps:
1.
Download and unzip the drivers to a folder.
2.
Connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB
bus, so no external power supply is required.
3.
The Windows “Found New Hardware Wizard” will appear. Select
the choices to install the drivers from a specific location, then
browse to the folder just created when the drivers were
downloaded from the EasySync website.
4.
If a notice appears indicating that the drivers are not signed,
select “Install Anyway”.
5.
The Driver wizard will appear a second time. Repeat the steps 2
to 4 above to complete the installation.
