ABB M4M 30 User Manual Download

Page: 68 / 84

M4M 30

NETWORK ANALYZER USER MANUAL

8.7.I/O

The number and type of I/O on the M4M network analyzer varies according to the different product

versions. Please refer to the table in “3.3 Versions” for the detail of I/O types per each M4M.

For each I/O specific information is shown according to the I/O type. Below an example for I/O set as

pulse output:

→

I/O

Info Visualization

Description

Type

How I/O slot has been configured.

Count

Number of pulses counted by the I/O. It is only available

if the I/O slot has been configured as Pulse input or Pulse

output.

State

Status of the I/O. It is only available if the I/O slot has

been configured as Tariff input, Pulse Output, Output ON,

Output OFF or Comm. output.

Move with

keys to navigate among the visualization pages.

Summary of Contents for M4M 30





















































































Search results

Summary of Contents for M4M 30

Reviews:

Related manuals for M4M 30

Brands by name

Popular brands

ABB M4M 30, User Manual

Search results

Summary of Contents for M4M 30

Reviews:

Related manuals for M4M 30

Brands by name

Popular brands