M4M 30
NETWORK ANALYZER USER MANUAL
53
• Clock
→
→
Tariffs
→
Clock
Selecting Clock, it is possible to define when the different tariffs are active, according to specific day and
hour, driven by Real Time Clock.
After selecting a tariff (6 tariffs available), it is needed to configure the type of day of the tariff - during
the week or during the weekend.
Select the day type among one of the following options: None, Weekday, Weekend. In order to disable a
tariff, please select None.
If weekday or weekend is chosen, then the tariff will be enabled during the weekdays or during the
weekend, and it is needed to select the start hour of the tariff. Configure the start hour in the format
hh:mm.
Each tariff is kept active until the next tariff is activated, thus to define the end hour of each tariff set it as the
start hour of the following tariff in the same day type.
• Input
→
→
Tariffs
→
Input
Selecting Input, the activation of the tariffs will follow the following table:
Input 1
Input 2
Input 3
Tariff
OFF
OFF
OFF
= T1
ON
OFF
OFF
= T2
OFF
ON
OFF
= T3
ON
ON
OFF
= T4
OFF
OFF
ON
= T5
ON
OFF
ON
= T6
Please see chapter “7.4 Inputs / Outputs” for further details on how to setup an I/O slot as Tariff input.
• Communication
Selecting Communication, the activation of the tariffs is controlled by bus.
It is possible control directly the activation of the individual tariffs. Multiple configuration settings
cannot be used.
→
→
Tariffs
→
Communication
See Modbus communication manual for details on how to read Tariff via communication.
Summary of Contents for M4M 30
Page 1: ...M4M 30 User manual 2CSG445042D0201 Network Analyzer M4M 30 User manual ...
Page 2: ......
Page 82: ... ...
Page 83: ......
