ABB M4M 30 User Manual Download

Page: 46 / 84

M4M 30

NETWORK ANALYZER USER MANUAL

• Time interval

The time interval is in common for all the channels of memory. For this reason, this can configuration has

to be done only once.

→

Historicals

→

Energy historicals

→

Time interval

Menu

Description

1 hour

The snapshot will take place now and the following one will be after

1 hour.

6 hours

The snapshot will take place now and the following one will be after

6 hours.

12 hours

The snapshot will take place now and the following one will be after

12 hours.

Day (default value)

The snapshot will take place now and the following one will be at

00:00.

Week

It is needed to indicate when the demand period ends between

these following options: Monday, Tuesday, Wednesday, Thursday,

Friday, Saturday, and Sunday.

Month

The snapshot will take place now and the following one will be at the

first of next month at 00:00.

Summary of Contents for M4M 30





















































































Search results

Summary of Contents for M4M 30

Reviews:

Related manuals for M4M 30

Brands by name

Popular brands

ABB M4M 30, User Manual

Search results

Summary of Contents for M4M 30

Reviews:

Related manuals for M4M 30

Brands by name

Popular brands