ABB IRB 2600, Product Specification

Page: 28 / 98

1.3.4 Expansion container for inverted mounting of the manipulator
Note
If the robot is used suspended without expansion container, it will cause a reduced
lifetime for the gearbox.
Validity of this section
This section is only valid for IRB 2600-20/1.65, IRB 2600-12/1.65, IRB 2600-12/1.85,
IRB 2600ID-15/1.85, IRB 2600ID-8/2.0, with option [224-2] Inverted mounting of the
manipulator.
Introduction to the expansion container
The expansion container is needed on inverted robots (IRB 2600-20/1.65, IRB
2600-12/1.65, IRB 2600-12/1.85, IRB 2600ID-15/1.85, IRB 2600ID-8/2.0) to make
sure that the amount of oil in gearbox axis 1 covers all important parts. Robots
ordered as suspended robots have the expansion container installed on delivery.
Expansion container
When the robot is fitted in a inverted mounting position, an expansion container
for oil must be fitted on gearbox axis 1.
xx0900000129
Expansion container A
Continues on next page
28 Product specification - IRB 2600
3HAC035959-001 Revision: AA
© Copyright 2009-2021 ABB. All rights reserved.
1 Description
1.3.4 Expansion container for inverted mounting of the manipulator