ABB IndustrialIT Compact HMI 800 Getting Started Download Page 135

Page: 135 / 192

Section 7 Administration

Change the Windows Computer Name in the Client Node

3BSE040587R4401

135

Change the Windows Computer Name in the Client Node

To change the Windows Computer Name of a Compact HMI 800 Client node please
go through the following steps

Disconnect the client form the servers as described in chapter

Connect and

Disconnect Client Nodes

on page 135.

Change the Computer Name and or IP address of the client.

Update the Hosts file in the client and the server with the changes
(“C:\WINDOWS\system32\drivers\etc\hosts”).

Remember that if the name of the server has been changed, the License Status
Viewer should be opened, and the CLS machine be changed.

Connect the client to the server as described in chapter

Connect and Disconnect

Client Nodes

on page 135.

The node name change of the client is now ready.

Connect and Disconnect Client Nodes

Client nodes has to be connected to the system. This is done in the following steps:

Connect the client node to the network.

Start the Configuration Wizard.

Select System Administration and click Next, and Next again.

Select Nodes and click Next.

Select Add Client and click Next.

In the dialog shown below select the client to be added e.g. HMI-Client01.

Summary of Contents for IndustrialIT Compact HMI 800

































































































































































































Search results

Summary of Contents for IndustrialIT Compact HMI 800

Reviews:

Related manuals for IndustrialIT Compact HMI 800

Brands by name

Popular brands

ABB IndustrialIT Compact HMI 800, Getting Started

Search results

Summary of Contents for IndustrialIT Compact HMI 800

Reviews:

Related manuals for IndustrialIT Compact HMI 800

Brands by name

Popular brands