ABB IMASI13, Instructions Manual

Page: 55 / 128

1 - 4 WBPEEUI240766B0
How to Use this Instruction
Description and
Operation
Explains the module operation and input circuits.
Installation Contains the cautions to observe when handling IMASI13
modules. It shows the steps to install and connect the module
before applying power. This section also covers switch and
jumper settings.
Configuration and
Calibration
Presents steps to configure the analog input module inputs for
specific input types and how to field calibrate an input channel
for a specific input type.
Operating Procedures Explains the operator interface to the IMASI13 module.
Troubleshooting Describes the IMASI13 module error codes and explains how
to test the module.
Maintenance Provides a preventive maintenance schedule for the IMASI13
module. This schedule can be used for all the modules in the
module mounting unit.
Repair and
Replacement
Contains the cautions and steps for removing and replacing
the IMASI13 module.
Appendices Appendix A provides configuration information for the NTAI06
termination unit. Appendix B provides information needed
when replacing an IMASI03 module with an IMASI13 module.
How to Use this Instruction
Read this instruction in sequence. It is important to become
familiar with the entire contents of this instruction before
using the module. Refer to a specific section for information as
needed.
1. Read the operating procedures section before installing the
module.
2. Perform the steps in the installation section.
3. Refer to the troubleshooting section to resolve problems if
they occur.
4. Refer to the maintenance section for scheduled mainte-
nance requirements.
5. Refer to the repair and replacement procedures to replace
a module.