ABB i-bus
KNX
Device technology
SA/S | 2CDC 505 056 D0208 37
Device type
Application program
Maximum number of
communication objects
Maximum number of
group addresses
Maximum number of
associations
SA/S 2.16.6.1
Switch 2f 16CS/…*
40
254
254
SA/S 4.16.6.1
Switch 4f 16CS/…*
76
254
254
SA/S 8.16.6.1
Switch 8f 16CS/…*
148
254
254
SA/S 12.16.6.1
Switch 12f 16CS/…*
220
254
254
* … = current version number of the application program
Please note
ETS and the current version of the device application program are required for programming.
The current application program is available for download at
www.abb.com/knx
. After import into ETS
it can be found under
ABB/Output/Binary output xf 16CS/…*
(x = 2, 4, 8 or 12).
The device does not support the locking function of a KNX device in ETS. If you inhibit access to all of
the project devices by using a
BCU code
, it has no effect on this device.
Data can still be read and programmed.
Important
The Switch Actuator types SA/S x.16.6.1 differentiate from the predecessor types SA/S x.16.5S by new
hardware and software.
While there have been few changes to the functions of the software, the hardware has been redesigned
for load currents up to 20 A. Furthermore, the current detection has been optimized and its accuracy
has been enhanced by a factor of four.
Existing projects can be converted to ensure operation with the new hardware / software.
For further information see:
Conversion of previous application program versions
, p. 53
.
For faster and simpler commissioning, it is also possible to copy the parameter settings of the outputs to
others or to exchange them with another output.
For further information see:
Copying and exchanging parameter settings
, p. 57
.
Summary of Contents for i-bus SA/S 12.10.2.1
Page 1: ...ABB i bus KNX SA S Switch Actuators Product Manual ...
Page 137: ......
