![background image](http://html1.mh-extra.com/html/abb/ht575751/ht575751_operation-manual_3392388096.webp)
Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.8 Installing nozzle ring
© Copyright 2017 ABB. All rights reserved.
HZTL4033_DE
Revision B
December 2017
Fig. 43: Installing nozzle ring 2
Part number
A170-M
A175-M
56014
M10
50 Nm
M10
50 Nm
Table 29: Tightening torque (56014)
6. Undo nuts (61037) and remove guide plate (90328).
7. Undo screws (90339) and remove retaining plate (90338) with guide rod (90336).
8. Coat the threads of screws (56014) and the contact surface between screw and locking
washer with high-temperature grease.
9. Fit the nozzle ring (56001) on the gas inlet casing (51001) using the screws (56014) and
locking washers (56015).
10. Bend over locking washers (56015).
Page
66
/
99