![background image](http://html1.mh-extra.com/html/abb/ht575751/ht575751_operation-manual_3392388108.webp)
Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.11 Axial clearance A after assembly
© Copyright 2017 ABB. All rights reserved.
HZTL4033_DE
Revision B
December 2017
8.11
Axial clearance A after assembly
WARNING
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
u
Wear safety gloves.
Wear safety gloves to protect against mechanical hazards.
The axial clearance (A) must be measured prior to removal and after installation of the cart-
ridge group.
CAUTION
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances outside
the tolerance and excessively worn parts.
u
Have the components assessed and, if necessary, replaced by an ABB Tur-
bocharging Service Station.
Fig. 56: Axial clearance
Product
Axial clearance A
[mm]
A170-M
0.30 ... 0.61
A175-M
0.35 ... 0.69
Table 38: Axial clearance
u
Measure and note axial clearance (A).
Page
78
/
99