![background image](http://html1.mh-extra.com/html/abb/ht574399/ht574399_operation-manual_3432374088.webp)
Operation Manual / 4 Product description / A100-M axial
8
Disassembly and assembly
Page 58 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
Tightening torques for assembly devices
Unless described otherwise, the screws and nuts of the assembly devices supplied by ABB
Turbo Systems must be tightened so they rest firmly against the surface.
WARNING
Suspended loads
Loads that are not attached according to regulations can cause injury to per-
sonnel or fatal accidents.
Only fasten the turbocharger, assemblies or individual parts on properly
functional lifting gear with sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.
People must not stand under suspended loads.
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
Definition of terms
Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. Assembly
devices are specially constructed and designed for the defined use; they are not trading
goods. Use assembly devices only for the described applications.
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting gear
is not supplied by ABB Turbo Systems.