![background image](http://html1.mh-extra.com/html/abb/ht574399/ht574399_operation-manual_3432374113.webp)
Operation Manual / 4 Product description / A100-M axial
8
Disassembly and assembly
Page 83 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
Fitting the wall insert
Figure 52: Fitting the wall insert
Part number
A170-M
A175-M
72011
M20
580 Nm
M24
1000 Nm
Table 39: Tightening torque (72011)
1. Remove lifting device (90190/90195).
2. Slide wall insert (77000) into compressor casing up to stop and remove guide stud
(90319).
3. Secure wall insert with screws (72011) and washers (72008).
For assembly of the alternative air inlet, see section Removing / Installing air-