![background image](http://html1.mh-extra.com/html/abb/ht574399/ht574399_operation-manual_3432374041.webp)
Operation Manual / 4 Product description / A100-M axial
2
Removal and installation
Page 11 / 113
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Revision A
July 2016
Turbocharger with clamping nuts
Figure 7: Removing the foot mounting
1. Loosen clamping nuts on compressor-end and turbine-end foot (see Loosening the clamp-
2. Fit transport screws (90334 / 90335) to secure the sliding block (68003) on the left and
right on the turbine-end foot.
Lift the turbocharger from the engine and put it down.
Cover all oil connections.