ABB FEP315, Original Instruction

Page: 9 / 48

Device designs
SM/FEX300/FEX500/FM/CSA-EN FEX300, FEX500 EN - 7
3.1.2 Div. 2
ProcessMaster 300 / ProcessMaster 500 HygienicMaster 300 / HygienicMaster 500
FEP315.....P.... / FEP515.....P.... FEH315.....P.... / FEH515.....P....
Div. 2 Div. 2
USA USA
FM approved, File 3034391 FM approved, File 3034391
NI: CL I, II / DIV2 / GP ABCDFG / T4 … T3 NI: CL I, II / DIV2 / GP ABCDFG / T4 … T3
CL III / DIV1, 2 / T4 … T3 CL III / DIV1, 2 / T4 … T3
CL I ZN2 AEx nA nC IIC T4 ... T3 CL I ZN2 AEx nA nC IIC T4 ... T3
DIP: CL II, III / DIV1 / GP EFG / T 70 °C … Tmedium DIP: CL II, III / DIV1 / GP EFG / T 70 °C … Tmedium
AEx tD 21 T70 °C ... Tmedium AEx tD 21 T70 °C ... Tmedium
Canada Canada
cFM approved, File 3034391C cFM approved, File 3034391C
NI: CL I, II / DIV2 / GP ABCDFG / T4 … T3 NI: CL I, II / DIV2 / GP ABCDFG / T4 … T3
CL III / DIV1, 2 / T4 … T3 CL III / DIV1, 2/ T4 … T3
CL I ZN2 Ex nA nC IIC T4 ... T3 CL I ZN2 Ex nA nC IIC T4 ... T3
DIP: CL II, III / DIV1 / GP EFG / T70 °C … Tmedium DIP: CL II. III / DIV1 / GP EFG / T70 °C … Tmedium
DIP A21 TA T70 °C ... Tmedium DIP A21 TA T70 °C ... Tmedium
1) Single-compartment
housing
2) Dual-compartment housing
3.2 Model with remount mount design
The transmitter is mounted in a separate location from the flowmeter sensor. The electrical
connection between the transmitter and flowmeter sensor may only be established using the
signal cable supplied.
Signal cable
Application D173D031U01 D173D027U01
Non-Ex. (< DN15)
 
Non-Ex. ( ≥ DN15)
 
Zone 2 / Div. 2 (< DN15)
 
Zone 2 / Div. 2 ( ≥ DN15)
 
Zone 1 / Div. 1
(all nominal diameter)
 

Application not permissible

Application permissible

Standard on delivery
IMPORTANT (NOTE)
For further information about the instruments' explosion protection approval please refer to the
Ex test certificates (available on the product CD or under www.abb.com/flow).
G0 1 08 2- 0 1
1) 2)
G0 1 330
1) 2)