ABB FEP315, Original Instruction

Page: 13 / 48

Device designs
SM/FEX300/FEX500/FM/CSA-EN FEX300, FEX500 EN - 11
3.4 Name plate
3.4.1 Name plate for model with integral mount design (dual-compartment housing)
G006 29
1
2
3
4
5
6
7
8
9
1 0
11
12
1 3
14
15
1 6
17
1 8
19
2 0
21
Fig.
1 Model number (for more detailed information about
the technical design, refer to the data sheet or the
order confirmation)
2 Order no.
3 Meter size and nominal pressure rating
4 Material:
Flange/lining/electrode
5 T
med
= max. permissible fluid temperature
T
amb
= max. permissible ambient temperature
6 Calibration value Qmax DN
7 Calibration value Ss (span)
Calibration value Sz (zero point)
8 Communications protocol of transmitter
9

Excitation frequency of sensor coils
10 Software version
11

Year of manufacture
12

CE mark
13

Serial number for identification by the manufacturer
14 Client-specific TAG number (if specified)
15 Protection type according to EN 60529
16

Supplementary information: EE = grounding
electrodes, TFE = partial filling electrode
17

Accuracy to which the unit was calibrated (e.g., 0.2%
of rate)
18

Version level (xx.xx.xx)
19 Label indicating whether the unit is subject to the
Pressure Equipment Directive (PED).
Information on the relevant fluid group.
Fluid group 1 = hazardous fluids, liquid, gaseous.
(Pressure Equipment Directive = PED).
If the pressure equipment is not subject to the
Pressure Equipment Directive 2014/68/EU, it is
classified in accordance with SEP (= sound
engineering practice) as per Art. 3 Para. 3 of the PED.
If no such information is present, it means that the
device does not claim to comply with the requirements
of the Pressure Equipment Directive 2014/68/EU.
Water supplies and connected equipment accessories
are classed as an exception in accordance with
guideline 1/16 of Art. 1 Para. 3.2 of the Pressure
Equipment Directive.
20

Ex mark according to FM (example)
21

Ex mark according to cFM (example)
IMPORTANT (NOTE)
Meters with 3A approval are labeled with an additional plate.