ABB Endura AZ40, Operating Instructions Manual

Page: 14 / 20

14 COM/AZ40/MOD–EN Rev. A | Endura AZ40 | Oxygen and carbon monoxide equivalent (COe) analyzer
A.11 Writable 8 bits
A.11.1 Measurement units
A.11.2 Operator page templates
A.11.3 Data view / log enables
MODBUS address Description Valid range
43000 Transmitter – temperature units 4 – Deg.C 5 – Deg. F
43001 Sensor 1 – filter type 0 – Off
4 – Sliding average
1 – Minimum value 2 – Maximum value 3 – Average value
43002 Fuel type 0 – Gas
4 – Bituminous
1 – Light oil
5 – Lignite
2 – Heavy oil 3 – Anthracite
43003 COe units 2 – % 3 – ppm
43004 Inlet thermocouple types 0 – None
4 – Type K
8 – Type T
1 – Type B
5 – Type N
2 – Type E
6 – Type R
3 – Type J
7 – Type S 43005 Outlet thermocouple types
43006 Efficiency calculation 0 – Disabled 1 – Enabled
43007 Blowback interval 0 – Off 1 – 24 hours
43008 Reserved
43009 Scheduled calibration frequency units 1 – Off 1 – Daily 2 – Weekly 3 – Monthly
43010 Scheduled calibration frequency 0 – 30 (days)
43011 Scheduled calibration frequency 0 – 7 (weeks)
43012 Scheduled calibration frequency
(months)
0 = 1
4 = 6
1 = 2
5 = 12
2 = 3 3 = 4
MODBUS address Description Valid range
43013 Operator page 2 template 0 – Off
1 – Oxygen
3 – Temperature
2 – Combustibles
4 – Efficiency
43014 Operator page 3 template
43015 Operator page 4 template
43016 Operator page 5 template
MODBUS address Description Valid range
43017 Diagnostics view 0 – Disabled 1 – Enabled
43018 Signals view
43019 Chart view
43020 Alarm view
43021 Analog output view
43022 Calibration log
43023 Alarm log
43024 Audit log
43025 Diagnostics log