II F 2-3
2.1
Environmental Conditions
System connection
Voltage, 3-phase:
230 to 1000 V to IEC 38
Voltage deviation:
±10% continuous; ±15% short-time *
Rated frequency:
50 Hz or 60 Hz
Static frequency deviation: 50 Hz ±2 %; 60 Hz ±2 %
Dynamic: frequency range: 50 Hz: ±5 Hz; 60 Hz: ± 5 Hz
df/dt:
17 % / s
* = 0.5 to 30 cycles.
Please note: Special consideration must be taken for voltage deviation
in regenerative mode.
Degree of protection
Converter Module:
IP 00
Enclosed converters:
IP 20/21/31/41
Paint finish
Converter module:
NCS 170 4 Y015R
Enclosed converter:
light grey RAL 7035
Fig. 2.1/1: Effect of the site elevation above sea level
on the converter’s load capacity.
Current reduction to (%)
Fig. 2.1/2: Effect of the ambient temperature on the
converter module load capacity.
Current reduction to (%)
Environmental limit values
Permissible ambient temp. with rated I
DC
: +5 to +40°C
Ambient temp. converter module:
+40°C to 55°C; s. Fig. 2.1/2
Change of the ambient temp.:
< 0.5°C / minute
Storage temperature:
-40 to +55°C
Transport temperature:
-40 to +70°C
Relative humidity:
5 to 95%, no condensation
Pollution degree:
Grade 2
Site elevation:
<1000 m above M.S.L.:
100%, without current reduction
>1000 m above M.S.L.:
with current reduct., see Fig. 2.1/1
Vibration converter module: 0.5 g, 5 Hz to 55 Hz
Noises:
Size
as module
in the ABB standard
(1 m distance)
cabinet
C1
59 dBA
57 dBA
C2
71 dBA
64 dBA
C3
71 dBA
70 dBA
C4
83 dBA
76 dBA
Regulatory Compliance
The converter module and enclosed converter components are designed for use in
industrial environments. In EEA countries, the components fulfil the requirements of the
EU directives, see table below.
North American Standards
In North America the system components
fulfil the requirements of the table below.
70
80
90
100
110
30
35
40
45
50
55°C
Note:
Only for Converter Modules
50
60
70
80
90
100
1000
2000
3000
4000
5000 m
r
e
w
o
P
r
o
f
y
t
e
f
a
S
t
n
e
m
p
i
u
q
E
n
o
i
s
r
e
v
n
o
c
£
V
0
0
6
e
l
u
d
o
m
r
o
f
d
r
a
d
n
a
t
S
C
8
0
5
L
U
l
o
r
t
n
o
c
l
a
i
r
t
s
u
d
n
I
l
a
i
r
t
s
u
d
n
i
:
t
n
e
m
p
i
u
q
E
s
t
c
u
d
o
r
p
£
V
0
0
6
5
9
4
1
.
o
N
.
2
.
2
2
C
A
S
C
European Union Directive
Manufacturer’s Assurance
Harmonized Standards
Converter module
Enclosed converter
Machinery Directive
89/392/EEC
93/68/EEC
Declaration of
Incorporation
EN 60204-1
[IEC 204-1]
EN 60204-1
[IEC 204-1]
Low Voltage Directive
73/23/EEC
93/68/EEC
Declaration of Conformity
EN 60146-1-1
[IEC 146-1-1]
EN 50178 [IEC --]
see additional
IEC 664
EN 60204-1
[IEC 204-1]
EN 60439-1
[IEC 439-1]
EMC Directive
89/336/EEC
93/68/EEC
Declaration of Conformity
Provided that all installation
instructions concerning
cable selection, cabling and
EMC filters or dedicated
transformer are followed.
EN 61800-3
➀
[IEC 1800-3]
EN 61800-3
➀
[IEC 1800-3]
were limits are under consideration
EN 50081-2 / EN 50082-2 has been supplied
➀
in accordance with
3ADW 000 032
➀
in accordance with
3ADW 000 032/
3ADW 000 091
The Technical Construction File to which this
declaration relates has been assessed by
Report and Certificate from ABB EMC
Certification AB being the competent Body
according to EMC Directive.
under
preparation
