GETTING STARTED
Fig. GS.1 Setting the Parameters
Step 3 – Setting the Parameters (Fig. GS.1)
A
Power-up the instrument. Press the
and
keys simultaneously and hold for 3
seconds to advance directly to Level 6 – Basic Configuration.
B
Set the appropriate application template, output type and control action. Use the
key to
advance between frames and upper
and
keys to adjust the default values – see
Section 5.2 for further information.
Note. When the output type has been selected, the available inputs and outputs default
to the settings shown in Table B on the rear fold-out.
C
If you are not using 4 to 20mA inputs, then select Level 7 using the upper
and
keys
and set up Analog Inputs I/P1 to I/P3 to suit your process – see Section 5.3.
D
Controller templates only:
Select Level 2 using the upper
and
keys and set the tune parameters:
•
Analog or Motorized Valve Control – set the Proportional, Integral and
Derivative terms.
•
Time Proportioning Control – set the Cycle Time, Hysteresis and P, I & D Terms
•
Heat/Cool Outputs – set the points at which the Output 1 and Output 2
become active.
E
Press
to return to the Operating displays.
F
Adjust the set point to the required value.
Your COMMANDER 350 is now in operation
APPL
LEV.6
INPt
LEV.7
tUNE
LEV2
B
C
D
+
A
01.SL
t.APP
ANLG
O.tYP
rEV
C.ACt
50
FrEJ
E
F
350.0
351.5
70
350.0
351.5
70
350.0
351.5
70
Note. With the above
configuration, no alarms or
limits have been set and
advanced functionality
(gain scheduling, set point
sources etc.) has not been
enabled.
ABB
BS EN ISO 9001:2000
Cert. No. Q5907
The Company
We are an established world force in the design and manufacture of
instrumentation for industrial process control, flow measurement, gas and
liquid analysis and environmental applications.
As a part of ABB, a world leader in process automation technology, we offer
customers application expertise, service and support worldwide.
We are committed to teamwork, high quality manufacturing, advanced
technology and unrivalled service and support.
The quality, accuracy and performance of the Company’s products result
from over 100 years experience, combined with a continuous program of
innovative design and development to incorporate the latest technology.
The UKAS Calibration Laboratory No. 0255 is just one of the ten flow
calibration plants operated by the Company, and is indicative of our
dedication to quality and accuracy.
✶
Note.
Clarification of an instruction or additional
information.
Information.
Further reference for more detailed information or
technical details.
EN 29001 (ISO 9001)
Lenno, Italy – Cert. No. 9/90A
Use of Instructions
Warning.
An instruction that draws attention to the risk of
injury or death.
Caution.
An instruction that draws attention to the risk of
damage to the product, process or surroundings.
R
E
GISTER
E
D
Health and Safety
To ensure that our products are safe and without risk to health, the following points must be noted:
1. The relevant sections of these instructions must be read carefully before proceeding.
2. Warning labels on containers and packages must be observed.
3. Installation, operation, maintenance and servicing must only be carried out by suitably trained personnel and
in accordance with the information given.
4. Normal safety precautions must be taken to avoid the possibility of an accident occurring when operating in
conditions of high pressure and/or temperature.
5. Chemicals must be stored away from heat, protected from temperature extremes and powders kept dry.
Normal safe handling procedures must be used.
6. When disposing of chemicals ensure that no two chemicals are mixed.
Safety advice concerning the use of the equipment described in this manual or any relevant hazard data sheets
(where applicable) may be obtained from the Company address on the back cover, together with servicing and
spares information.
Although
Warning
hazards are related to personal injury, and
Caution
hazards are associated with equipment or
property damage, it must be understood that operation of damaged equipment could, under certain operational
conditions, result in degraded process system performance leading to personal injury or death. Therefore, comply
fully with all
Warning
and
Caution
notices.
Information in this manual is intended only to assist our customers in the efficient operation of our equipment. Use
of this manual for any other purpose is specifically prohibited and its contents are not to be reproduced in full or part
without prior approval of the Technical Communications Department.
