16
…4.2
Set Up Totalizer
…4
ADVANCED CONFIGURATION LEVEL
Wrap On/Off
If the wrap-around facility is selected, the front panel total is automatically reset to the
Preset
Value
once the
Predetermined Value
is reached.
If the wrap-around facility is not selected, the front panel total stops counting when the
Predetermined Value
is reached.
Select
ON
to enable or
OFF
to disable.
Note. If a relay or digital output is assigned to the wrap facility the relay or digital output is
energized by a wrap pulse for approximately 1 second when the
Predetermined Value
is reached.
A wrap pulse is always transmitted when the
Predetermined Value
is reached.
Reset Enable
Select
ENBL-Y
to enable or
ENAbL-N
to disable the counter reset frame in the
Totals Page
,
OPERATOR LEVEL
.
Reset Source
Select the digital source required to reset the totalizer.
For description of source, refer to Table 2.1 on page 10.
Counter Stop/Go Enable
Select
ENbL-Y
to enable or
ENAbL-N
to disable the counter Stop/Go frame in the
Totals Page
,
OPERATOR LEVEL
.
Source Stop/Go
Select the digital source required to stop or start the totalizer.
An ‘active’ source state starts the totalizer and an ‘inactive’ source stops the totalizer.
For description of source, refer to Table 2.1 on page 10.
Return to Select Totalizer frame.
•
Totalization
rESEt
StOPGO
ENbL–Y
rSt.SrC
EQN–4
SELECt
ENbL–N
NONE
ENbL–Y
ENbL–N
SG SrC
EQN–4
NONE
tOt–x
rAP
ON
OFF
Summary of Contents for COMMANDER 1900 Series
Page 34: ...32 NOTES...
