manualshive.com logo in svg

ABB Busch-priOn Series, Technical Reference Manual

Share
Download
ABB Busch-priOn Series Technical Reference Manual Download Page 9

KNX Technical Reference Manual | 0073-1-7388 | 9 

 

Pos: 16.1 /Produkthandbuch - DIN-A4/Überschriften/1. Ebene/A - F/Einfache Montage @ 9\mod_1269243901843_15.doc @ 52338 @ 1 

Easy to mount 

 

Pos: 16.2 /Produkthandbuch - DIN-A4/Busch-priOn/Einfache Montage/Einfache Montage - Text @ 10\mod_1272614580478_15.doc @ 53803 @  

The carrier frame serves to hold and make contact with the individual control elements, the 8.9 cm (3,5”) TFT display, the 
end strips and the flush-type bus coupler. The position of the control elements can be selected freely for multiple 
combinations. A special strip must be mounted on top as well as below. Its material can be different to that of the module. 
The support frame is mounted by screwing it to the flush-type bus coupler and, for multiple combinations, also to the wall. 
 
Thanks to the anti-fingerprint surface, the stainless steel Busch-

priOn®

 is easy to keep clean and maintains its sophisticated 

surface finish even when it is in use. Glass surfaces and end strips match the 

carat

® series. 

 

Pos: 16.3 /Produkthandbuch - DIN-A4/Busch-priOn/Einfache Montage/Einfache Montage - Abbildung 3fach @ 9\mod_1269245658421_15.doc @ 52398 @  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Busch-priOn

®

 

Glass black 

Busch-priOn

®

 

Studio white 

Busch-priOn

®

 

Stainless steel 

Busch-priOn

®

 

Glass white 

 

Pos: 17 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layou+++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @  

 

Summary of Contents for Busch-priOn Series



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands