KNX Technical Reference Manual
Busch
-
priOn
®
36 | 0073-1-7388 | KNX Technical Reference Manual
Pos: 22.70 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Jalousieaktor @ 10\mod_1269514191049_15.doc @ 53234 @ 22
Shutting actuator
Pos: 22.71 /KNX/Applikationsbeschreibungen/Applikationen - App/Jalousieaktor/App. - Jalousieaktor - DIN-A4 @ 10\mod_1269513864598_15.doc @ 53229 @
With the "Shutting actuator" application the shutting actuator is activated (Flush-type switch actuator 2-gang).
It has two 1-bit communication objects "Move" and "Adjust". In addition, the Venetian blind can be moved to a defined
position via the 1-byte communication objects "Position" and "Slats position".
The behaviour can be adjusted so that no undefined state arises during a bus voltage recovery.
There is also the option of additionally activating a 1-bit communication object "Status response". The shutting actuator can
send out its current state over this.
Shutting actuator objects
No. Object
name
Data type
Flags
0 Move
1 Bit EIS7 / DPT 1.008
C, W
1 Adjust
1 Bit EIS7 / DPT 1.007
C, W
1 Stop
1 Bit / DPT 1.017
C, W
2 Position
1 Byte EIS5 / DPT 5.001
C, W
3 Slats
position
1 Byte EIS5 / DPT 5.001
C, W
4 Wind
alarm
1 Bit / DPT 1.005
C, W
5 Rain
alarm
1 Bit / DPT 1.005
C, W
6 Frost
alarm
1 Bit / DPT 1.005
C, W
7 Move
status
1 Bit EIS7 / DPT 1.008
C, R, T
8 Position
state
1 Byte EIS5 / DPT 5.001
C, R, T
9
Slats position status
1 Byte EIS5 / DPT 5.001
C, R, T
Pos: 22.72 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Schaltaktorapplikation @ 10\mod_1269514683702_15.doc @ 53245 @ 222
Switch actuator application
Pos: 22.73 /KNX/Applikationsbeschreibungen/Applikationen - App/Schaltaktorapplikation/App. - Schaltaktorapplikation - DIN-A4 @ 10\mod_1269514450016_15.doc @ 53240 @
The flush-type switch actuator is activated with the "Switch actuator application" application.
For this the application has a 1-bit communication object "Switch object". Depending on the setting of the "Relay
characteristics" parameter, the relay contact is opened or closed after receipt of an ON or OFF telegram.
The behaviour can be adjusted so that no undefined state arises after a bus voltage failure and subsequent return of voltage.
There is also the option of activating an additional 1-bit communication object "Status response". The switching actuator can
send out its current state over this. Whether an ON or an OFF telegram is triggered during a closed or an opened relay
contact depends on the setting of the "Relay characteristics" and "Invert status response" parameters.
Switch actuator application objects
No. Object
name
Data type
Flags
0 Switch
object
1 Bit EIS1 / DPT 1.001
C, W
1
Status response signal
1 Bit EIS1 / DPT 1.001
C, T
Pos: 22.74 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layou+++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @
