manualshive.com logo in svg

ABB Busch-priOn Series, Technical Reference Manual

Share
Download
ABB Busch-priOn Series Technical Reference Manual Download Page 25

KNX Technical Reference Manual | 0073-1-7388 | 25 

 

Pos: 22.26 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Lichtszenennebenstelle mit Speicherfunktion @ 9\mod_1269436310937_15.doc @ 52783 @ 2 

 

Light scene extension unit with memory function 

 

Pos: 22.27 /KNX/Applikationsbeschreibungen/Applikationen - App/Lichtszenennebenstelle_mit_Speicherfunktion/App. - Lichtszenennebenstelle mit Speicherfunktion - DIN-A4 @ 9\mod_1269435757171_15.doc @ 52778 @  

Via the application "Light scene extension unit with memory function", a predefined light scene number is called up when the 
rocker is actuated. 
The application "Light scene extension unit with memory function" makes a separate set of parameters and communication 
objects available in each case for the right or left side of the rocker. 
The application facilitates calling up a light scene via a rocker side while the other rocker side can be assigned an additional 
"button orientated" function. 
The user has the option to trigger a light scene memory command with a long button contact. 
 

Light scene extension unit objects with memory function 

No. Function 

Object 

name 

Data 

type 

Flags 

0 Switching 

1 Byte EIS1 / DPT 1.001 

C, W, T, U 

 

Pos: 22.28 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Stufenschalter, Wippe Gesamt @ 9\mod_1269437200187_15.doc @ 52793 @ 22 

 

Step switch, rocker total 

 

Pos: 22.29 /KNX/Applikationsbeschreibungen/Applikationen - App/Stufenschalter_Wippe_gesamt/App. - Stufenschalter, Wippe Gesamt - DIN-A4 @ 9\mod_1269436921171_15.doc @ 52788 @  

The application "Step switch, rocker total" facilitates step-type switching. This means that the user can trigger different 
switching processes with each new operation of the left or right side of the rocker. 
Example: 
First operation (right rocker side) switches lamp 1 on. 
Second operation (right rocker side) switches lamp 1 off and lamp 2 on. 
Third operation (right rocker side) switches lamp 2 off and lamp 3 on. 
Fourth operation (left rocker side) switches lamp 3 off and lamp 2 on. 
Fifth operation (left rocker side) switches lamp 2 off and lamp 1 on. 
etc. 
The application differentiates between whether the left or right side of the rocker was operated. Depending on the setting, 
one lower or one higher step can be switched to. 
Up to five switching steps can be activated. 
 

Step switch objects, rocker total 

No. Object 

name 

Data type 

Flags 

0 

Switching step 1 

1 Bit EIS1 / DPT 1.001 

C, W, T 

1 

Switching step 2 

1 Bit EIS1 / DPT 1.001 

C, W, T 

2 

Switching step 3 

1 Bit EIS1 / DPT 1.001 

C, W, T 

3 

Switching step 4 

1 Bit EIS1 / DPT 1.001 

C, W, T 

4 

Switching step 5 

1 Bit EIS1 / DPT 1.001 

C, W, T 

 

Pos: 22.30 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layou+++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 2 

 

Summary of Contents for Busch-priOn Series



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands