manualshive.com logo in svg

ABB Busch-priOn Series, Technical Reference Manual

Share
Download
ABB Busch-priOn Series Technical Reference Manual Download Page 23

KNX Technical Reference Manual | 0073-1-7388 | 23 

 

Pos: 22.16 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/U - Z/Wertsender, Wippe Gesamt @ 9\mod_1269425035171_15.doc @ 52725 @ 22 

 

Value sender, rocker total 

 

Pos: 22.17 /KNX/Applikationsbeschreibungen/Applikationen - App/Wert Wippe/App. - Wertsender, Wippe Gesamt - DIN-A4 @ 9\mod_1269424602000_15.doc @ 52720 @  

With the "Value sender, rocker total" application, a telegram with the predefined value is sent out at an actuation of the right 
or left side of the rocker. 
The "Value sender, rocker total" application differentiates here between whether the rocker is actuated on the left or right 
side. 
 

Value sender objects, rocker total 

No. Object 

name 

Data type 

Flags 

0 

Switching value(1 Bit) 

1 Bit EIS1 / DPT 1.001 

C, W, T, U 

0 

Switching value(1 Byte 0..100 %) 

1 Byte EIS6 / DPT 5.001 

C, W, T, U 

0 

Switching value(1 Byte 0..255) 

1 Byte EIS14 / DPT 5.010 

C, W, T, U 

0 

Switching value(2 Byte Float) 

2 Byte EIS5 / DPT 9.xxx 

C, W, T, U 

0 

Switching value(2 Byte Signed) 

2 Byte EIS10 / DPT 7.001 

C, W, T, U 

0 

Switching value (2 Byte Unsigned) 

2 Byte EIS10 / DPT 8.001 

C, W, T, U 

0 

Switching value (4 Byte Float) 

4 Byte EIS9 / DPT 14.xxx 

C, W, T, U 

0 

Switching value (4 Byte Signed) 

4 Byte EIS11 / DPT 13.001 

C, W, T, U 

0 

Switching value (4 Byte Unsigned) 

4 Byte EIS11 / DPT 12.001 

C, W, T, U 

 

Pos: 22.18 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/U - Z/Wertsender, Wippe Links / Rechts @ 9\mod_1269425766812_15.doc @ 52735 @ 22 

 

Value sender, rocker left/right 

 

Pos: 22.19 /KNX/Applikationsbeschreibungen/Applikationen - App/Wert Taste/App. - Wertsender, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269425575718_15.doc @ 52730 @  

With the "Value sender, rocker left/right" application, a telegram with a predefined value is sent out at an actuation or release 
of the rocker. 
The "Value sender, rocker left/right" application does not differentiate between whether the rocker is actuated on the left or 
right side. In each case, the application makes a separate set of parameters and communication objects available for the 
right and left side of the rocker. 
The application enables realising a switching function via one rocker side, while the other rocker side can be assigned with 
an additional "button-orientated" function. 
 

Value sender objects, rocker left/right 

No. Object 

name 

Data type 

Flags 

0 

Switching (1 Bit) 

1 Bit EIS1 / DPT 1.001 

C, W, T, U 

0 

Switching (1 Byte 0..100 %) 

1 Byte EIS6 / DPT 5.001 

C, W, T, U 

0 

Switching (1 Byte 0..255) 

1 Byte EIS14 / DPT 5.010 

C, W, T, U 

0 

Switching (2 Byte Float) 

2 Byte EIS5 / DPT 9.xxx 

C, W, T, U 

0 

Switching (2 Byte Signed) 

2 Byte EIS10 / DPT 8.001 

C, W, T, U 

0 

Switching (2 Byte Unsigned) 

2 Byte EIS10 / DPT 7.001 

C, W, T, U 

0 

Switching (4 Byte Float) 

4 Byte EIS9 / DPT 14.xxx 

C, W, T, U 

0 

Switching (4 Byte Signed) 

4 Byte EIS11 / DPT 13.001 

C, W, T, U 

0 

Switching (4 Byte Unsigned) 

4 Byte EIS11 / DPT 12.001 

C, W, T, U 

 

Pos: 22.20 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layou+++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @  

 

Summary of Contents for Busch-priOn Series



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands