ABB ACS880-x04, Firmware Manual

Page: 391 / 604

Parameters 391
90.13 Encoder 1
revolution extension Displays the revolution count extension for encoder 1.
With a single-turn encoder, the counter is incremented when
encoder position (parameter
90.11 ) wraps around in the
positive direction, and decremented in the negative direction.
With a multiturn encoder, the counter is incremented when the
revolutions count (parameter
90.12 ) exceeds the value range
in the positive direction, and decremented in the negative
direction.
This parameter is read-only.
-
-2147483648 …
2147483647 Encoder 1 revolution count extension. -
90.14 Encoder 1 position
raw Displays the raw measurement data of encoder 1 position
(within one revolution) as a 24-bit unsigned integer received
from the encoder interface.
This parameter is read-only. -
0…16777215 Raw encoder 1 position within one revolution. -
90.15 Encoder 1
revolutions raw Displays the revolutions of (multiturn) encoder 1 within its
value range (see parameter
92.14 Revolution data width ) as a
raw measurement.
This parameter is read-only.
-
0…16777215 Raw encoder 1 revolution count. -
90.20 Encoder 2 speed Displays encoder 2 speed in rpm.
This parameter is read-only. -
-32768.00 …
32767.00 rpm Encoder 2 speed. See par.
46.01
90.21 Encoder 2 position Displays the actual position of encoder 2 within one
revolution.
This parameter is read-only. -
0.00000000 …
1.00000000 rev Encoder 2 position within one revolution. -
90.22 Encoder 2 multiturn
revolutions Displays the revolutions of (multiturn) encoder 2 within its
value range (see parameter
93.14 Revolution data width ).
This parameter is read-only.
-
0…16777215 Encoder 2 revolutions. -
90.23 Encoder 2
revolution extension Displays the revolution count extension for encoder 2.
With a single-turn encoder, the counter is incremented when
encoder position (parameter
90.21 ) wraps around in the
positive direction, and decremented in the negative direction.
With a multiturn encoder, the counter is incremented when the
revolutions count (parameter
90.22 ) exceeds the value range
in the positive direction, and decremented in the negative
direction.
This parameter is read-only.
-
-2147483648 …
2147483647 Encoder 2 revolution count extension. -
90.24 Encoder 2 position
raw Displays the raw measurement data of encoder 2 position
(within one revolution) as a 24-bit unsigned integer received
from the encoder interface.
This parameter is read-only. -
0…16777215 Raw encoder 2 position within one revolution. -
No. Name/Value Description Def / FbEq16