ABB ACS880-07C, Hardware Manual

Page: 168 / 188

168 Technical data
Protection classes
Degrees of protection
(IEC/EN 60529) IP22, IP42
Overvoltage category
(IEC 60664-1) III
Protective class
(IEC/EN 61800-5-1) I
Ambient conditions
Environmental limits for the drive are given below. The drive is to be used in a
heated, indoor, controlled environment.
Operation
installed for stationary
use
Storage
in the protective package
Transportation
in the protective package
Installation site altitude 0 to 4000 m (13123 ft)
above sea level [above
1000 m (3281 ft), see
section
Derating ]
- -
Air temperature -0 to +50 °C (32 to
122 °F).
No frost allowed.
See section Derating .
-40 to +70 °C (-40 to
+158 °F) -40 to +70 °C (-40 to
+158 °F)
Relative humidity 5 to 95% Max. 95% Max. 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the
presence of corrosive gases.
Contamination levels
(IEC 60721-3-3,
IEC 60721-3-2,
IEC 60721-3-1)
No conductive dust allowed.
Chemical gases: Class
3C2
Solid particles: Class 3S2
Chemical gases: Class
1C2
Solid particles: Class 1S3 Chemical gases: Class
2C2
Solid particles: Class 2S2
Atmospheric pressure 70 to 106 kPa
0.7 to 1.05 atmospheres 70 to 106 kPa
0.7 to 1.05 atmospheres 60 to 106 kPa
0.6 to 1.05 atmospheres
Vibration (IEC 60068-2) Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz) sinusoidal
Shock (IEC 60068-2-29) Not allowed
Max. 100 m/s
2
(330
ft./s
2
), 11 ms
Max. 100 m/s
2
(330
ft./s
2
), 11 ms
Free fall Not allowed 100 mm (4 in.) for weight
over 100 kg (220 lb) 100 mm (4 in.) for weight
over 100 kg (220 lb)
Auxiliary circuit power consumption
Cabinet heater and
cabinet lighting
(options
+G300 and +G301)
100 W
External uninterruptible
power supply (option
+G307 150 W