ABB ACS850 series, Firmware Manual

Page: 183 / 260

Parameters 183
50.05 Fba ref2 modesel Selects the fieldbus reference FBA REF2 scaling.
See parameter
50.04 Fba ref1 modesel .
Raw data See parameter 50.04 Fba ref1 modesel . 0
Torque See parameter 50.04 Fba ref1 modesel . 1
Speed See parameter 50.04 Fba ref1 modesel . 2
50.06 Fba act1 tr src Selects the source for fieldbus actual value 1 when parameter
50.04 Fba ref1 modesel / 50.05 Fba ref2 modesel is set to
Raw data .
Pointer Value pointer setting (see Terms and abbreviations on page
63 ).
-
50.07 Fba act2 tr src Selects the source for fieldbus actual value 2 when parameter
50.04 Fba ref1 modesel / 50.05 Fba ref2 modesel is set to
Raw data .
Pointer Value pointer setting (see Terms and abbreviations on page
63 ).
-
50.08 Fba sw b12 src Selects the source for freely programmable fieldbus status
word bit 28 (
02.24 FBA main sw bit 28 SW B28).
Const Bit pointer setting (see Terms and abbreviations on page 63 ). -
Pointer
50.09 Fba sw b13 src Selects the source for freely programmable fieldbus status
word bit 29 (
02.24 FBA main sw bit 29 SW B29).
Const Bit pointer setting (see Terms and abbreviations on page 63 ). -
Pointer
50.10 Fba sw b14 src Selects the source for freely programmable fieldbus status
word bit 30 (
02.24 FBA main sw bit 30 SW B30).
Const Bit pointer setting (see Terms and abbreviations on page 63 ). -
Pointer
50.11 Fba sw b15 src Selects the source for freely programmable fieldbus status
word bit 31 (
02.24 FBA main sw bit 31 SW B31).
Const Bit pointer setting (see Terms and abbreviations on page 63 ). -
Pointer
51
51 FBA settings
Fieldbus adapter-specific settings.
51.01 FBA type Displays the type of the connected fieldbus adapter module.
0 = Fieldbus module is not found, or it is not properly
connected, or parameter
50.01 Fba enable is set to Disable ,
1 = FPBA-xx PROFIBUS-DP adapter module, 32 = FCAN-xx
CANopen adapter module, 37 = FDNA-xx DeviceNet adapter
module
51.02 FBA par2 Parameters 51.02 … 51.26 are adapter module-specific. For
more information, see the User’s Manual of the fieldbus
adapter module. Note that not all of these parameters are
necessarily visible.
-
… … … …
51.26 FBA par26 See parameter 51.02 FBA par2 . -
No. Name/Value Description FbEq