ACS550 User’s Manual
31
Start-Up
Parameters Mode
Use the Parameters mode to view and edit parameter
values:
1. Select PARAMETERS in the Main Menu.
2. Press UP/DOWN to highlight the appropriate parameter
group, then press SEL.
3. Press UP/DOWN to highlight the appropriate parameter
in a group.
NOTE!
The current parameter value appears below the
highlighted parameter.
4. Press EDIT.
5. Press UP/DOWN to step to the desired parameter value.
Note!
To view the parameter default value: In the set mode, press UP/DOWN
simultaneously.
6. Press SAVE to store the modified value or press
CANCEL to leave the set mode. Any modifications not
saved are cancelled.
7. Press EXIT to return to the listing of parameter groups,
and again to return to the main menu.
Start-up Assistant Mode
When the drive is first powered up, the Start-up Assistant guides you through the
setup of a few basic parameters. For example, at the first start, the drive
automatically suggests entering the first task, Language Select.
The Start-up Assistant is divided into tasks. You may activate the tasks one after the
other, as the Start-up Assistant suggests, or independently. (You are not required to
use the assistant, you may use instead, the parameter mode to set the drive
parameters.)
